It is a set that creates an embankment with a large radius S-shaped curve, and you can reproduce various railway scenes by combining it with extensions and straight wide rail embankments.
- Easy and reliable connection between rails
- Length 985 mm (same as S280 x 3 + S72.5 x 2), width 148 mm (4 double track intervals), S-shaped rail layout with straight line 140 mm in between
- The height of the embankment of this product is the same as the separately sold <3228> wide rail embankment set, and the appearance is the same design.
- Curved rail with embankment C1641-5-EM is a wooden sleeper type
- Curved rail with embankment C1641-5-EM is a cant rail with a radius of 1641 mm and an embankment with a curve angle of 5 degrees, and the cant inclination angle is about 4 degrees.
- Approach rail with embankment CR (L) 1641-5-EM is a curved rail with a radius of 1641 mm and an embankment with a curve angle of 5 degrees.
- Concrete type and steel frame type gate type single wire overhead line pillars are included.
- Aerial bare track poles (steel frame type) that can be attached to the upper road girder bridge attached to the separately sold <3270> upper road iron bridge set (green) are included.
- Straight rail S140 × 1
- Curved rail with embankment C1641-5-EM × 2
- Approach rail with embankment CR1641-5-EM x 2
- Embankment approach rail CL1641-5-EM × 2
- Embankment S140 × 2
- Runner parts: gate type single wire overhead line pole etc.
- Runner parts: equipment box, etc.
- Parts: Embankment roadbed S140-EM
- Parts: embankment end A
- Parts: embankment end B