MSRP: JPY9,020
You save JPY1,407

Plamokojo Work Station Ver.2.0 Pro Hobby Tool

Add to Cart


MSRP: JPY9,020
You save JPY1,407


,UPC: ,Weight: ,Width: ,Height: ,Depth: ,Shipping:


Calculated at Checkout


Convenient functions are packed in a compact body!

- It is useful not only for basic cutting and cutting, but also for work situations that require precision such as assembly and assembly of fine parts.
- If you work on the workstation, the area around you will not be cluttered, making cleanup easy.
- On top of this, you can perform detailed assembly using a loupe and LED light as well as work such as cutting and scraping.
- Also, if you remove the text stand after assembly, it will be easier to remove the tools behind the main body, and it will be useful when you move to the process of remodeling.
- Even if a small part is dropped during work, it will fall into the internal tray, reducing the risk of losing the part.
Perfect working part for various tasks:
- The working part of the main body is made of a thick and durable metal plate with countless holes.
- The hole diameter is set to a size that allows cutting chips to fall off and parts to be difficult to fall off.
- Large chips that cannot be dropped from the hole can be dropped from the notch on the front side of the main unit.
- In addition to scraps, it is also possible to remove small items such as used sandpaper.
- The plate alone has sufficient strength, but when performing work that requires more force, such as pushing through parts, you can increase the strength by attaching the included metal stay as necessary. is possible.
- The metal plate can be easily removed, and fine shavings accumulated in the corners can be easily cleaned.
Drawer-type tray convenient for trash disposal:
- The tray that serves as a tray for scraps, etc. can be pulled out and removed, so it can be easily thrown away when garbage has accumulated.
- The capacity of the tray is also sufficiently secured, reducing the number of garbage disposals and allowing you to concentrate on your work.
- Even if parts are dropped during work, they fall into the internal tray, reducing the risk of losing them.
- Since the capacity of the tray is sufficiently secured, you can reduce the frequency of throwing away garbage and concentrate on your work.
Removable, convenient and easy-to-read text stand:
- The lid can be used as a stand to prop up the instruction manual, increasing the workspace and increasing space efficiency.
- The stand is adjusted to the optimum angle for propping up the instruction manual, and even a booklet-type instruction manual can be inserted with the page open.
- In addition, when the angle is set to 90°, the lock is released, and if the lid is removed, it can be transformed into a dust collection table for cutting and cutting.
- It becomes easier to take tools placed in the back than the main body, and it becomes easier to arrange the work space.
Increase the amount of light with COB light! Touch type for easy ON/OFF:
- Extremely bright, surface-emitting LED lights brighten and illuminate every corner of your workstation's work area.
- Because it emits light on the surface, multiple shadows of the placed parts are less likely to occur, and the eyes are less tired, making it suitable for long hours of work.
- Large-capacity built-in battery enables continuous use for a long time.
- The light switch is a touch type, which is less likely to break down and easy to turn on/off even during work.
Frameless, transparent and easy-to-see loupe:
- The large loupe uses a hard lens that is highly transparent and hard to scratch.
- You can see a clearer enlarged image at about 3x magnification.
- The frameless lens reduces shadows caused by light.
- Like the LED light, the LED on the loupe side can also be turned on/off by touch.
Renewed mounting unit for light magnifier:
- Create a new mold for the light and loupe connector terminals.
- By integrating the connector terminal on the main unit side, the strength of the connector part is increased, and the low center of gravity suppresses wobble and enables stable operation.
- In addition, it became easy to insert and remove.
- The sturdy arm has increased holding power, making it easier to adjust the position of the light magnifier.
- Anti-dust rubber processing is applied to the surface, making it difficult to get dirty.
- A protective cap for the USB unit when the terminal is not used is included.
Easy-to-use cutter mat:
- The dedicated cutter mat that comes with the product has two colors with different colors on both sides.
- Since both sides can be used, it is easy to use the green side for gluing and cutting parts, and the black side for cutting masking tape and decals.
- Of course, it can be removed and used separately.
- The compact size makes it convenient for small work on the table, such as cutting out masking tape and decals.
Built-in larger capacity battery:
- The battery capacity for supplying power to the loupe and LED light has been doubled.
- It is possible to use the LED light and the built-in magnifying glass for a longer time even in places without a power source.
- USB-TypeC is used for the charging terminal of the built-in battery, so charging with the latest smartphone charger and cable can be easily performed.
With a long USB cable, you can work without worrying about the remaining battery while supplying power from the wall charger to the work area.
- If you are working while connected to a power supply, you can check the battery level and charging status at a glance with the indicator on the upper left side of the main unit.
Compact when the lid is closed!:
- When storing, the lid can be closed for compact storage.
- Since the top surface is flat, you can stack and store unfinished kits, tool boxes, sorting trays, etc.
Product Specifications:
- Body approx. 297mm X x209mm X 30mm (when stored)
- Loupe about 140mm X x96mm X 7mm arm part about 320mm
- LED light about 120mm X 30mm X 10mm arm part about 320mm
- Charging cable approx. 1.5m
- LED built-in loupe x 1
-  LED light x 1
- USB Type-c cable for charging (USB A to USB C) x 1
- USB unit protective cap x 2
- Metal stay for inside the tray x 2
-  Dedicated cutter mat x 1
-  Nipper holder (right-handed / left-handed) x 1 each
- Protective cap for nipper holder x 4
- Body: ABS
- Working part plate: Steel
- Work part metal stay: Steel
- Cutter mat: PVC
Built-in battery:
- Capacity: 2000mA

Customers Also Viewed